Anilox Cleaner –Reclean was specially developed for water and UV-based inks and lacquers on anilox rollers and printing accessories. You can use this more dilute roller cleaner for inline washing systems as well as the manual cleaning of your anilox rollers. With the periodic use of the Anilox Cleaner – Reclean, you benefit from a highly economical cleaning process that guarantees an optimum cavity volume of your rollers. Find out more about the application, features and precautionary measures of our Anilox.

Physical and chemical properties

Ingredients: Softener, active agent, mist suppressant, alkaline mixture,

Density: 1.18 PH ≈12

Flash point (°C) : > 94 persistence and degradation under 101.3 KPA

Soil mobility: Soluble in water, can be transported in soil,

Bio-accumulation: Low bio-accumulation

Use and storage
GE: This product is for spray use which can ensure the anilox to be fully infiltrated in 10-15 minutes.This method is quick and efficient. With the use of steel wire brush and clean water,the anilox will take on an altogether new aspect. 

Noted: Before cleaning, please make sure the anilox roll is roughly washed and dried in order to avoid unnecessary waste.When ambient temperature is becoming lower, it’s necessary to increase the soaking time. This product is a low volatile, if the roll needed to be soaked for longer, there’s no need for wrapping film.

Protection Measures: Please wearing a mask and rubber gloves even though the product has limit harm to human.

Packaging and Storage: This product is stored in PP or PE containers, the use of PET containers is strictly Prohibited: Storage environment need to avoid high temperature or naked light.